|
The dates listed are available for open seating or can be reserved for a
single
company if specific configurations or applications would like to
be used for the teaching medium. If you wish to reserve the entire class
or request a specific class for dates other than what is listed, please
contact Wendy Horton at:
(972) 459-8254
or
wendy.horton@vinsonprocess.com.
ROC/FloBoss for
Production Applications,
Course
1001
(PDF)
This Vinson Process Controls Company course is for technicians,
engineers, operators, and others responsible for installing, configuring,
monitoring, troubleshooting, and gathering data using ROCLINK 800 and
Fisher® Flow Computers. The primary focus of this
course is to provide comprehensive experience in gas production
installations.
Overview: This 3-1/2
day course provides fundamental skills necessary to:
• Install and correctly terminate power and
grounding and signal wiring to a Fisher Flow Computer on production
settings
• Configure, calibrate, and troubleshoot a Fisher Flow Computer for AGA
measurement and control for gas production
• Install, configure, and optimize Production Applications used to
control production wells
• Gather, analyze, and store historical data and configuration files
This course provides maximum hands-on time with Fisher 809 Flow
Computers and ROCLINK800 software.
Prerequisites: A good working knowledge of Microsoft Windows and
a general concept of gas measurement and production.
Topics
• ROC Hardware
• I/O Modules and Wiring
• Sensors, Wiring, and Addressing
• Configuration: I/O, AGA, History
• Calibration
• Saving / Reporting / Restoring
• PID Loop Design Configuration
• LCD
• Configuration,
Implementation, Optimization, and Reporting for Production Applications
ROC/FloBoss for
Production Applications,
Course
1001
(PDF)
Course Location & 2012 Dates:
Lewisville, TX>
4/9, 7/9, 10/8
Odessa, TX>
2/20
Farmington, NM>
4/23
Price:
$1,325 USDL per student (Lewisville, TX)
$1,425 USDL per student (Odessa, TX & Farmington, NM)
Enrollment Request>
More Information Contact:
Wendy Horton at: (972) 459-8254 or
wendy.horton@vinsonprocess.com
ROC/FloBoss for Measurement and Control,
Course
1002
(PDF)
This Vinson Process Controls Company course is for technicians,
engineers, operators and others responsible for installing, configuring,
monitoring, troubleshooting, and gathering data using ROCLINK 800 and
Fisher Flow Computers. The primary focus of this course is to provide
comprehensive experience in gas pipeline measurement installations.
Overview: This 3-1/2 day course provides
fundamental skills necessary to:
• Install and correctly terminate power and grounding and signal wiring
to a Fisher Flow Computer on transmission settings
• Configure, calibrate, and troubleshoot a Fisher Flow Computer for AGA
measurement and control of multiple meter run settings
• Install, configure, and optimize Gas Chromatograph, Run Switching, and
Logic Interfaces
• Gather, analyze, and store historical data and configuration files
This course provides maximum hands-on time with Fisher 809 Flow
Computers and ROCLINK800 software.
Prerequisites: A good working knowledge of
Microsoft Windows and a general concept of gas measurement and control.
Topics
• ROC Hardware
• I/O Modules and Wiring
• Sensors, Wiring, and Addressing
• Configuration: I/O, AGA, History
• Calibration
• Saving / Reporting / Restoring
• PID Loop Configuration
• LCD
• Installation,
Configuration, and Troubleshooting for Gas Chromatograph Interfaces
•
Configuring Run Switching and Cause &
Effect Logic Tables for Gas Control Manager
ROC/FloBoss for
Measurement and Control,
Course
1002
(PDF)
Course Location & 2012 Dates:
Lewisville, TX>
2/13, 5/21, 8/13, 11/12
Odessa, TX>
6/18
Farmington, NM>
8/20
Price:
$1,325 USDL per student (Lewisville, TX)
$1,425 USDL per student (Odessa, TX)
Enrollment Request>
More Information Contact:
Wendy Horton at: (972) 459-8254 or
wendy.horton@vinsonprocess.com
Advanced Applications and
SCADA Integration,
Course
2001
(PDF)
This Vinson Process Controls Company course is for
technicians, engineers, operators, and others responsible for advanced
control applications and SCADA communications and integration. The
primary focus of this course is to provide comprehensive experience in
advanced control for multiple applications and integration into SCADA.
Overview: This 3-1/2 day course provides fundamental
skills necessary to:
• Configure advanced PID control for both analog and discrete
control applications
• Build specialized logic control using Function Sequence
Tables (FST)
• Understand communication signals, ROC, and Modbus Protocols
• Using ROC or Modbus efficiently in a communication system and SCADA
• Advanced programming skills using Cause and Effect
This course provides maximum hands-on time with Fisher 809 Flow
Computers and ROCLINK800 software.
Prerequisites: Courses 1001 or 1002, basic understanding of control
and operational standards.
Topics
• Advanced PID Control: Analog/Discrete, Over Ride Control
• Function Sequence
Tables: Designing, Implementing, and Saving
•
Communications, including:
- Serial Signals
- ROC Protocol, using Opcodes and Opcode Tables
- Modbus Protocol, Master and Slave Modes
• Advanced Techniques of Cause and Effect
• Advanced Display Building and Usage
Advanced Applications and SCADA Integration,
Course 2001
(PDF)
Course Location & 2012 Dates:
Lewisville, TX>
3/12, 6/11, 9/17
Price:
$1,325 USDL per student (Lewisville, TX)
Enrollment Request>
More Information Contact:
Wendy Horton at: (972) 459-8254 or
wendy.horton@vinsonprocess.com
Advanced
Well Control using Production Manager,
Course
3001
(PDF)
This Vinson Process Controls Company course is for
operators, production foremen, well engineers and instrument technicians
responsible for configuring and tuning artificial lift systems for gas
wells and tank measurement and inventory. The primary focus of this
course is to provide comprehensive experience in gas well automation and
control.
Overview: This 1-1/2 day course provides the
fundamental skills necessary to:
• Install Production Manager software and license keys
• Configure Production Manager using different types of artificial lift
technology
• Tune artificial lifts using Production Manager software
• Configure Tank Management
• Monitor lifts and tank production
This course provides maximum hands-on time with Fisher 809 flow
computers and Roclink 800 software
Topics
• Platforms and Versions
• Licensing
• Deliquification and Optimization
• Configuration and Optimization
• Tuning
• Tank Management
• Logic Blocks
Advanced
Well Control using Production Manager,
Course
3001
(PDF)
Course Location & 2012 Dates:
Lewisville, TX>
4/16, 8/20
Price: $630 USDL per student
Note: This course will start on Monday at 1:00 PM and finish 4:00
Tuesday. Lunch will be provided on Tuesday.
Enrollment Request>
More Information Contact:
Wendy Horton at: (972) 459-8254 or
wendy.horton@vinsonprocess.com
Logistical
Information:
Course
Times/Meals: Courses 1001, 1002 & 2001 will begin at 1:00 PM Monday
and finish 4:00 PM on Thursday. Lunch will be provided Tuesday -
Thursday.
Course 3001 will begin on Monday at 1:00 PM and finish 4:00 Tuesday.
Lunch will be provided on Tuesday.
To Enroll or for More Information Contact: Wendy Horton at: (972)
459-8254 or
wendy.horton@vinsonprocess.com. ROC 809
and FB107 Flow Computers will be used in
the training furnished by Vinson Process Controls Company, LP. Upgrades
to ROCLINK800 will be available to licensed users if required. Laptop
and LOI cable to be furnished by each student.
Registration Deadline/Payment Information: 2 weeks prior to
course start date. Purchase order/payment is required at time of
enrollment, credit cards accepted.
Cancellations: You may cancel your reservation up to 14 days
prior to the start of the course without incurring a cancellation
charge. Limited enrollment makes it necessary to charge 50% of the full
tuition for cancellations received during the 14 days prior to start of
the course and full tuition for failure to attend without canceling.
Substitutions are accepted until the first day of class. Vinson Process
Controls Company, LP reserves the right to cancel or reschedule courses
due to insufficient students with a full refund to registered students.
Any necessary cancellations will be announced a minimum of 72 hours
prior to the start of class.
Enrollment Request>
Download Course Flyer (PDF)
|
